digital microfluidics dmf is another platform for lab-on-a-chip systems that is based upon the manipulation of microdroplets. droplets are dispensed, moved, stored, mixed, reacted, or analyzed on a platform with a set of insulated electrodes.
immunoprecipitation ip is the technique of precipitating a protein antigen out of solution using an antibody that specifically binds to that particular protein. this process can be used to isolate and concentrate a particular protein from a sample containing many thousands of different proteins.
liquid chromatography–mass spectrometry lc-ms is an analytical chemistry technique that combines the physical separation capabilities of liquid chromatography or hplc with the mass analysis capabilities of mass spectrometry ms . coupled chromatography - ms systems are popular in chemical analysis because the individual capabilities of each technique are enhanced synergistically.
customer information control system cics is a family of mixed application servers that provide online transaction management and connectivity for applications on ibm mainframe systems under z/os and z/vse.. cics is middleware designed to support rapid, high-volume online transaction processing.a cics transaction is a unit of processing initiated by a single request that may affect .
customer information control system cics is a family of mixed application servers that provide online transaction management and connectivity for applications on ibm mainframe systems under z/os and z/vse. cics is middleware designed to support rapid, high-volume online transaction processing.
a multimeter can be a hand-held device useful for basic fault finding and field service work, or a bench instrument which can measure to a very high degree of accuracy. multimeters are available in a wide range of features and prices.
next as the ring leaves the magnetic zone the ring is flushed and a vacuum of about – 0.3 bars is applied to remove the magnetic particles attached to the matrix ring. standard operating procedure. high-gradient magnetic separator is to separate magnetic and non-magnetic particles concentrate and tails from the feed slurry.
a hall effect sensor is a device that is used to measure the magnitude of a magnetic field. its output voltage is directly proportional to the magnetic field strength through it.. hall effect sensors are used for proximity sensing, positioning, speed detection, and current sensing applications.. frequently, a hall sensor is combined with threshold detection so that it acts as and is called a .
mass spectrometry ms is an analytical technique that measures the mass-to-charge ratio of ions.the results are typically presented as a mass spectrum, a plot of intensity as a function of the mass-to-charge ratio.mass spectrometry is used in many different fields and is applied to pure samples as well as complex mixtures.
a conductive object will experience a repulsion force. this can lift objects against gravity, though with continual power input to replace the energy dissipated by the eddy currents. an example application is separation of aluminum cans from other metals in an eddy current separator. ferrous metals cling to the magnet, and aluminum and other .
the versatility of flash/transport reactors are suitable for a wide range of quality sensitive separation processes. the following describes the main applications for the flash reactor, note that most flash reactor applications do not require any post-treatment or pre-treatment systems due to a lack of waste generated.
capillary electrophoresis–mass spectrometry ce-ms is an analytical chemistry technique formed by the combination of the liquid separation process of capillary electrophoresis with mass spectrometry. ce-ms combines advantages of both ce and ms to provide high separation efficiency and molecular mass information in a single analysis. it has high resolving power and sensitivity, requires .